A solution of synthetic material for producing a joint filling material for levelling parquet floors. Using the abrasive dust obtained from sanding parquet.
Application
The sanding dust from the sanding process before the final sanding is to be used with Lecol 7500 to be mixed into a smooth paste. The paste must be applied before the final sanding process. The joints must be completely filled. Only once the filler has completely filled. Only once the filler has completely dried can the final sanding process take place.
Important
In order to avoid differences in colour, only sanding dust of the same wood, possibly on the same floor should be used. When mixing Lecol 7500, room and material temperatures should not be below +15 degrees.
Coverage: Covage 2-4m2 / 1kg
Adhesives Specification
| Component Base |
Solvent-based |
| Storage & Transportation |
Do not use at a temperature below +10 ° C, Do not store below +5 ° C, Protect from frost. |
| Shelf Life |
Shelf life approx 6 months at normal room temperature |
| Other Features |
Do not use below + 20° C or above 65% relative air humidity. During cold weather periods warm up |
| Drying Time |
30 - 60 minutes, depending on spreading thickness and climate conditions. |
| Code |
156555 |
